Coextrusion machine

Dalian three-tier co-extrusion blown film machineIn the process of heating equipment 3 to 4 hours should check each part is normal and voltage ammeter pointer is normal, if you have questions and repair.Cleaning membrane and change of network, good protective gloves should be worn, pay attention to the nose section of the terminal with bare parts, to avoid being electrically damaging;Cleaning membrane mouth and change the screen must be used when copper shovel, in order to avoid injury and membrane mouth and change the screen, at the same time when the outage of net pay attention to efficiency, the grasp of time, temperature is unfavorable to avoid affecting blown film work next time.

The mould

Mouth mold diameter: 450 mm

Part 3, the wind ring

The wind ring, double draught cooling air ring.The wind ring power: 7.5 kw

4, inner cooling system: cooling device within the IBC

5, traction, automatic winding

Traction motor power: 2.2 kw

The traction speed: 0-65 - m/min

11 m traction height:

Correction system: EPS

Cutting way: fly knife cutting

High dimension (width) 10.5 mX7.25 mX11m

Dalian lushun friend rock plastic machinery co., LTD. Is the production of plastic machinery and equipment specialized factory, the design is novel, the craft is advanced, technical force is abundant, the product constitute seriation, standardization, sold well all over the country, favored by the majority of customers.Production of high and low density polyethylene, polypropylene, film crew, agriculture, land, greenhouse film crew.Web site:www.dlyouyan.com