The use of plastic film blowing machine considerations should not be ignored

The use of plastic film blowing machine considerations should not be ignored

Film blowing machine production is membrane, the membrane based on the characteristics of materials and widely used with different fields. Suitable for all kinds of high-grade packing film, plastic film, protective film, and so on. This film because of its good barrier property, keeping fresh, well protected against dampness, frost proof, oxygen insulation, oil resistant, can be widely used in light and heavy package. Such as all kinds of fresh fruit, meat, pickles, fresh milk, liquid beverage, medical supplies, etc. Blown film machine mainly according to the application scope of the different materials, such as PP film blowing machine output film are suitable for all kinds of supermarket shopping bags, such as fungus bag hardness is larger for tensile strength and brightness demand is not high, such as bags, and high pressure PE blown out of the film is suitable for all kinds of bags, back to the material of film suitable for all kinds of garbage bags, etc., blown film machine is widely used in various industries.

Plastic film blowing machine - the use of plastic film blowing machine

1, the operation of the machine operator can not stand in the front, lest appear accidental injury and operating personnel. When blown film machine feed fight with metal impurities in raw material and operating small tools such as damage to the hard object fall into the barrel of the machine. No gloves when operating rotating machine, in case involved in injury.

2, check and add good reducer, the lubrication oil in the compressor, check the lubrication of mechanical transmission parts. Avoid dry operation damage the machine and noises.

3, mold discharging mouth uniform, can wear gloves slowly lift pipe, pipe end will be closed at the same time, the micro into gas regulator, from central hole of the plug in a small amount of compressed air, and then carefully stiff foam frame, plates, and wear into the traction roller, guide roller and coiling

4, film forming conditions, scope, improve the forming temperature, cooling air temperature and blowing ratio; Increasing the film turbidity and glossiness; Vice to improve.

5, you must check each operation starting power supply wiring whether there is a disconnect, leakage; Check instrument damage is not normal. To ensure the safety of the parts first before starting the normal, lest affect production and cause an accident.

6 of the pipe, blowing compressed air pressure to appropriate, cannot make the pipe burst, and to guarantee the stability of membrane tube symmetry, relative to guarantee the quality of production.