Dalian Youyan Plastic Machinery Co., Ltd.
Couplet: Feng Manager
Phone/fax:086-0411-86260347
Hand:18624289888
13604263838
Mail box:21272059@qq.com
Network access:www.dlyouyan.com
Address: Chinese Lushunkou District of Dalian City, the three streams town (take Tuchengzi Dalian to Lushun Road westbound vehicle airport about 200 meters in front of about 100 meters)
Three-tier co-extrusion blown film factory introduction to three layers co-extrusion blown film machine performance
SGXM-2200X3(2200/2600/3000)
In rotary, membrane cold inside the bubble, three-tier co-extrusion blown film machine
SGXM - 2200 x3 three-tier co-extrusion composite film production line by two SJ60X30, 1 SJ70 extruder, die, the wind ring, cooling system, 2200 traction and winding auxiliary machinery, electric control system composition, the machine performance is as follows:
A, co-extrusion die flow computer optimization design to adapt to a variety of co-extrusion composite materials
B, the IBC film cooling system inside the bubble
C, the range of the material: LDPEHDPELLDPEMLLDPEEVA/metallocene and their mixture
D, the traction horizontal reciprocating rotation plus or minus 360 degrees, the winding formation
E, mouth mould plug-in replacement, adapt to various specifications thin film
Part 1, the host (extruder)
2 SJ60X30 extrusion machine (inner and outer) is placed 1 SJ70X30 (placed in the middle)
The screw diameter: 60 mm and 70 mm
Length to diameter ratio, spake (120).
The screw rotation speed: 120 RPM (120) 120 RPM (120).
Drive motor power: SJ60X30 extruder, 37 kw ac motor
SJ70X30 extruder, 45 kw ac motor
Extruder production capacity: SJ60X30 extruder, 160 kg/h (LDPE);
SJ70X30 extruder, 300 kg/h (LDPE)
Part 2, the wind ring
The wind ring, double draught cooling air ring.The wind ring power: 7.5 kw
3, mold,
Mouth mold diameter: 450 mm
4, traction, automatic winding
The traction speed: 0-65 - m/min
11 m traction height:
Traction motor power: 2.2 kw
Cutting way: fly knife cutting
Correction system: EPS
High dimension (width) 10.5 mX7.25 mX11m
5, inner cooling system: cooling device within the IBC
Plastics blown film lineFactory from the introduction of advanced technology, specializing in the productionDouble blow film machineMonolayer film blowing machine, a single layer, three-tier co-extrusion blown film machine, blown film machine.Guarantees products, is responsible for the safe commissioning, training operators, welcome customers to negotiate, the choose and buy.www.dlyouyan.com