Three layer co extrusion film   blowing machineIs melted and blow into a plastic particles heating film.Plastic film blowing machinePoints a lot of kinds, have LDPE, HEPE, PP and so on.

Blown film machineCorrect method of use

1, check the temperature control in good condition, heating appliances in good condition, pay attention to timely adjust the heating temperature of each point in the range of indicators.

2, check the drawing speed, control the film thickness.

3, observation adjustment film thickness uniform, folding size up to the standard.

4, check the air cylinder pressure storage, not too high, but shall have the standby pressure.

5, check control raw material and mixing ratio.

6, check the raw materials have impurities, especially immediately with the iron mixed with magnetic inspection.

7, check the reduction space and air compressor cylinder lubricating oil.

8, regularly check the running motor temperature rise and mechanical transmission.Blow out the new particle is a new material, colour and lustre are, according to clean, good tensile bag.